最新訊息

  AOI機器視覺軟體
  機器視覺工業相機
    USB2.0
    USB3.0
    IEEE1394
    GigE
    PoE
    VGA
    PCI Express
    SMART
    OTHER
    SWIR
    High Speed
  高速攝影High Speed
  工業檢測光學鏡頭
    鏡頭介紹
    CS-Mount
    C-Mount
    S-Mount
    定倍鏡頭
    變焦鏡頭
  機器視覺檢測光源
  機台設備訊號整合
  視覺檢測工控電腦
 
AOI機器視覺軟體 / High Speed Recording
高速錄影遠端監控
 
No. FR-NP-HRR
   

High Speed Recording Software Remote

簡介

  • 你是否需要一個程式就可以捕捉多個攝影機的影像
  • 你是否要操做多台電腦和相機
  • 你是否需要一個可以利用網路遠端控制所有攝影機的應用程式
  • StreamPix Remote 針對高速影像錄製進行高速遠端管理

    特色

    • Remotely view StreamPix images (live feed or playback).
    • Remote control over the main features of StreamPix.
    • Create new remote sessions based on computer name or IP address and StreamPix workspace name.
    • Show real-time per computer and per workspace status information.
    • File history available for better video shoot management.
    • Efficient CPU usage and network traffic monitoring.
    • Ability to send notifications to a 3rd-party application via UDP protocol./li>
    • Remotely control camera settings and adjustments (for simultaneous control cameras must be identical).
    • Support for Vicon Blade messaging protocole.
    • Operate via wired LAN or Wifi network.

    範例

    Your application requires the capturing of 8 sequences simultaneously from 8 different cameras at the same time.

    • Because of the camera used, the required bandwidth implies the use of 2 different computers, one for each group of 4 cameras.
    • Hence 2 computers are required with one copy of StreamPix per computer.
    • StreamPix Remote can operate on any of the 2 computers that are running StreamPix or any other computer on the network (LAN or Wifi).
    • Any operation such as "start recording" performed on the StreamPix Remote will automatically start recording on each of the 2 copies of StreamPix simultaneously for all 8 cameras.
    • StreamPix Remote gives you the flexibility to remotely control each camera workspace indivudually.

    Third party remote control

    StreamPix Remote can be remotely controlled by Vicon Blade Mocap systems. StreamPix Remote will decode Vicon Blade messages and control StreamPix Workspaces using Vicon messages. The following actions are supported:

    • Immediate start recording
    • Immediate stop recording with or without automatic sequence file closing.
    • Start recording on matching LTC/VITC time code to sequence or jpeg files.
    • Stop recording on matching LTC/VITC time code with or without automatic sequence file closing
    • Create recording destination sequence / JPEG file based on scene / take name.
    • IP and Port filtering for usage under multiple Vicon Blade environment.

    Status broadcasting via UDP messaging

    StreamPix Remote can broadcast simple UDP messages to any UDP listener clients. For each action done into StreamPix Remote, UDP messages can be sent. Pre and Post messages are available:

    • Pre messages are UDP broadcast before the action is sent to each StreamPix connected workspace.
    • Post messages are UDP broadcast after the action was sent to all StreamPix connected workspaces.
    • IP and Port filtering.

    All message codes are available on request.

     




     
    特別聲明:本網站為汎叡有限公司版權所有,請尊重智慧財產權,未經允許請勿任意轉載、複製或做商業用途
    所使用的所有商標名稱, 分屬各商標註冊公司所有。
    Copyright c 2009 Fadracer Technology Inc. All Rights Reserved.
    汎叡有限公司 TEL:+886-2-2585-8592 FAX:+886-2-2598-8802 E-MAIL:[email protected]